Paint Protection Film (PPF) and vinyl wraps require special care. Nanolex Scrub (PPF & Wrap) has been specifically developed for these surfaces to remove tough dirt and discoloration without damaging the delicate structure of the film.

• Removes baked-on insect remains & road film
• Gentle on PPF and glossy/matte films
• Ideal for clear PPF and tinted films
• Does not affect the film structure

Attention: Nanolex Scrub (PPF & Wrap) does not remove scratches – it is not a polishing agent, but it may affect existing sealants, waxes, and coatings! Always test on an inconspicuous area first.

Instructions for Use:

1. Preparation: Clean the PPF or vinyl wrap with a pH-neutral shampoo or mild cleaner and dry it thoroughly.
2. Application: Apply a small amount of Nanolex Scrub (PPF & Wrap) to a soft microfiber cloth or foam pad and work it over the affected area using light to medium pressure in straight-line movements to loosen any discoloration or dirt.
3. Residue Removal: Wipe off with a damp microfiber cloth and allow to dry.
4. Check: If necessary, repeat the process, but avoid excessive rubbing to prevent damage to the film.

Nanolex Scrub (Wheel) – Maximum Cleaning Performance for Wheels

Removes even the most stubborn dirt, yellowing, and baked-on brake dust.

Wheels are exposed to extreme conditions – baked-on brake dust, road grime, and discoloration require intensive cleaning. Nanolex Scrub (Wheel) has been specifically designed to tackle these challenges, combining chemical cleaning power with mechanical deep-cleaning technology to restore wheels to their original condition.

• Dissolves baked-on brake dust & metal particles

• Removes yellowing & discoloration

• Ideal for painted, polished, and anodized rims

• Heavy-duty performance with maximum cleaning power

Attention: Nanolex Scrub (Wheel) does not remove scratches – it is not a polishing agent, but it may affect existing sealants, waxes, and coatings! Always test on an inconspicuous area first.

Instructions for Use:

1. Preparation:

• Clean the rims with a suitable rim cleaner (e.g., Nanolex Wheel Cleaner & Iron Remover).

• Rinse thoroughly and dry.

2. Application:

• Apply a small amount of Nanolex Scrub (Wheel) to a microfiber cloth, foam pad, or soft brush.

• Work into the affected area using light to medium pressure in circular or straight-line motions.

3. Residue Removal:

• Wipe off with a damp microfiber cloth or rinse with a pressure washer.

4. Check:

• Repeat if necessary – older deposits may require multiple treatments.

Labelling according to Regulation (EC) No. 1272/2008 [CLP]

Classification according to Regulation (EC) No. 1272/2008 [CLP]

Not classified

Adverse physicochemical, human health and environmental effects

To our knowledge, this product does not present any particular risk, provided it is handled in accordance with good occupational hygiene and safety practice.

Material Safety Data Sheet (MSDS) DE PDF

Material Safety Data Sheet (MSDS) EN PDF