Nanolex Heavy Cut Polish is a highly effective abrasive polish that has been specially developed to effectively remove deep scratches, severe swirls and paintwork defects up to a 2000 grit, while providing a very good finish. This polish contains advanced calcined aluminium oxide abrasives that allow for quick and efficient defect correction, while also leaving a smooth surface with a good finish. Nanolex Heavy Cut Polish is ideal for use on all paint types and can be applied by hand or machine. It is perfect for professional detailers who need a powerful polish to remove heavy paint defects and create the basis for the next polishing step.

• Maximum abrasion: Removes deep scratches, swirls and severe paint defects.
• Advanced abrasives: Ensures quick and effective defect correction.
• Ideal for all paint types: Suitable for all paint types, including hard and soft paints.
• Glossy finish: Leaves a uniform finish for the next polishing step.

Instructions for use:

1. Preparation: Thoroughly clean the paint surface and make sure it is free of dirt and dust.
2. Application: Apply a small amount of Nanolex Heavy Cut Polish to a Nanolex Heavy Cut Polishing Pad.
3. Buffing: Spread the polish with slow movements using a rotary or eccentric polishing machine, slowly increasing the speed until the polish film becomes transparent.
4. Post-treatment: For a perfect finish, use a finer polish such as Nanolex Medium Cut or Finishing Polish.

FAQ:

• Can Nanolex Heavy Cut Polish be used on all paint types?
  Yes, the polish is safe for all paint types.
• How often should Heavy Cut Polish be used?
  Heavy Cut Polish should only be used as needed to remove deep scratches and severe defects.
• Is it possible to use the polish manually?
  We recommend machine application to achieve excellent results.
• Does the polish leave holograms?
  When applied correctly, the polish does not leave holograms, especially if a finer polishing step follows.
• Should a sealant be applied after application?
  Yes, after polishing it is recommended to apply a sealant or wax to protect the surface.

Labelling according to Regulation (EC) No. 1272/2008 [CLP]

Classification according to Regulation (EC) No. 1272/2008 [CLP]

Not classified

Adverse physicochemical, human health and environmental effects

To our knowledge, this product does not present any particular risk, provided it is handled in accordance with good occupational hygiene and safety practice.

Material Safety Data Sheet (MSDS) DE PDF

Material Safety Data Sheet (MSDS) EN PDF